When the loader in the process of use, there is a white smoke, then it must be Komatsu loader parts problems, so this requires a specific check, this you and Komatsu loader parts manufacturer to understand it:.
Komatsu loader parts which problems will cause the white smoke situation?
First of all, we should look at whether the diesel fuel into the water, this is because the water and diesel fuel some combustion will be white smoke, then for this kind of situation, we need to release the sediment oil, and then discharge the water, of course, if there is a lot of water, we need to replace the diesel fuel in a timely manner.
- Komatsu loader parts manufacturers tell you that when the engine supply advance angle is too small, the diesel engine temperature is not high, part of the fuel is too late to burn with the exhaust gas, the excluded oil mist will form a white gas.
- If the Komatsu loader parts of the cylinder gasket wash bad, connected waterway or cylinder liner cracks, so that the cooling water constantly seeped into the cylinder, in the exhaust, by the hot airflow evaporated or washed away, the formation of water mist or water vapor, in the form of white smoke discharge.
- Engine temperature is not enough, the fuel and air sprayed into the cylinder to form a mixture of gas, part can not burn, the exhaust pipe white smoke. Note here that after the locomotive is started, attention should be paid to the insulation of the water tank, run with the throttle, so that the locomotive temperature reaches 50.C or more, and gradually increase the load.